TC Helicon Pedal Ditto Mic Looper
MIC IT. LOOP IT.
Pure Looping with unlimited overdubs
Easy set up with Intelligent Mic Gain
Total control – with 2 Switches or Mic ControlTM
INSTANT LAYERED MASTERPIECES
Go from idea to performance in an instant, with ease. One knob, two buttons – it couldn’t be simpler! With its superior audio quality, unlimited overdubs and Undo/Redo, Ditto Mic Looper is the essential choice for looping vocals and instruments.
WATCH IT WORK
Top single artist Daniel Bedingfield and emerging singer Butterscotch share their first creations with Ditto Mic Looper…
NEW: INTELLIGENT MIC GAIN
Using Ditto Mic Looper is exactly like plugging a mic directly into the PA – you only need to set input gain once, at the mixer. No more trial-and-error to find the optimal balance between input gain on your effects unit and the mixing desk.
IT’S THIS SIMPLE
• Press LOOP to record. Press again to play the loop. Repeat for endless overdubs. Hold to undo/redo latest overdub.
• Press STOP to stop all loops, press again to restart play from the beginning – or hold it for a quick, noiseless erase.
…AND THIS VERSATILE
As a singer, beatboxer, horn-blower, percussionist, or string-player, the power and musical ease of Ditto Mic Looper cannot be overstated. Even the faintest musical idea can be explored, built up, torn down and just plain enjoyed in private, practice or performance. See it at work in this video.
THE MAGIC OF TWO SWITCHES
The dedicated STOP switch on Ditto Mic Looper means that you can pause your loop exactly when you want, without having to double-tap to stop and fudge your timing – as on single switch units. This means that your LOOP button is totally focussed on your looping creation with Record/Play/Overdub functions.
PURE LOOPING… …NO FLUFF.
Intelligent Mic Input Gain for Quick and Painless Setup.
Built In Mic Control, Infinite Overdubs and Loop Storage.
Intuitive LED Indicator for Modes; Dedicated Loop Switches.
Quiet Mic Preamp with Phantom Power, Balanced XLR Out, Power & USB for Updates.
Loop Record/Play/Overdub (or Record/Overdub/Play configuration)
Intelligent Mic Input Gain
Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
Weight: 0.92 lb. (0.42 kg)
Two part dies cast metal
Input Connector: XLR Female, balanced
Input Impedance: 2.7 kOhm balanced
Maximum Input Level: -1 dBu
Signal to Noise Ratio: 112 dB A-weighted
Phantom Power: 32V (always on)
Output Connector: XLR Male, balanced
Output Impedance: 250 Ohms balanced
Maximum Output Level: -1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
USB for firmware and control
Mic Control using TC-Helicon MP-75 Microphone or Sennheiser e835 FX mic
SAFETY AND REGULATIONS
Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W
EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing
WHAT’S IN THE BOX?
Region specific power supply